sterilization

How to use Elinic® heat sterilization bags

To use dry heat sterilization pouches, follow these steps:

  • Make sure the dry heat pouches you are using are Elinic® dry heat pouches. It is important to use pouches that are designed for dry heat, as we also have steam EtO gas sterilization pouches that cannot be used in a dry heat sterilizer (autoclave).
  • Place the items to be sterilized inside the dry heat pouches. Make sure the items are properly cleaned and prepared before placing them in the pouches.
  • Seal one end of the pouch with the adhesive tape incorporated in the pouch. Make sure the seal is secure to prevent air from entering the bag.
  • Place the sealed pouches in the dry heat sterilizer, following the instructions.
    Set the autoclave to the appropriate temperature and recommended time for the sterilization process. The temperature and time will depend on the specific requirements of the items being sterilized, but it is generally recommended to sterilize at 180°C for 60 minutes.
  • Wait for the sterilization cycle to complete. Once the cycle is complete, remove the pouches from the sterilizer using appropriate protective equipment, as the pouches may be hot.
  • Allow the pouches to cool before handling or opening. Follow the instructions for cooling and handling the pouches safely.
  • Open the pouches carefully and use the sterilizing elements.

Para usar bolsas de esterilización por calor seco, siga estos pasos:

  • Asegúrese de que las bolsas de calor seco que está utilizando estén sean las bolsas para calor seco Elinic. Es importante usar bolsas que estén diseñadas para calor seco, ya que también tenemos las bolsas de esterilización por vapor, gas EtO que no se pueden usar en un esterilizador de calor seco (autoclave).
  • Coloque los artículos que desea esterilizar dentro de las bolsas de calor seco. Asegúrese de que los artículos estén debidamente limpios y preparados antes de colocarlos en las bolsas.
  • Selle un extremo de la bolsa con la cinta adhesiva incorporada en la bolsa. Asegúrese de que el sellado sea seguro para evitar que entre aire en la bolsa.
  • Coloque las bolsas selladas en el esterilizador de calor seco, siguiendo las instrucciones.
  • Configure el autoclave a la temperatura adecuada y el tiempo recomendado para el proceso de esterilización. La temperatura y el tiempo dependerán de los requisitos específicos de los artículos que se esterilizan.
  • Espere a que se complete el ciclo de esterilización. Una vez finalizado el ciclo, retire las bolsas del esterilizador utilizando el equipo de protección adecuado, ya que las bolsas pueden estar calientes.
  • Deje que las bolsas se enfríen antes de manipularlas o abrirlas. Siga las instrucciones para enfriar y manipular las bolsas de forma segura.
  • Abra las bolsas con cuidado y use los elementos esterilizados según los vaya necesitando.

Recuerde seguir siempre estas instrucciones y pautas de Elinic cuando use bolsas de calor seco para la esterilización.

Tenga en cuenta que los pasos anteriores son una guía general. Para obtener instrucciones específicas sobre el uso de las bolsas de calor seco puede utilizar el formulario de contacto

Sterilization in the operating room

Sterilization in the operating room is a fundamental process to ensure patient safety during surgery. It refers to the set of techniques and procedures used to eliminate or inactivate microorganisms present on surgical instruments, equipment and surfaces in the surgical area.

There are different sterilization methods that can be used in the operating room, including:

Steam sterilization: also known as autoclaving, this is one of the most commonly used methods in the operating room. It consists of subjecting instruments to high temperatures and pressure in the presence of steam, which eliminates microorganisms and, by sealing the bags, maintains sterility for up to 180 days.

Radiation sterilization: mainly used for disposable medical materials, such as gloves, syringes or lancets. Ionizing radiation, such as gamma rays or X-rays, is used to eliminate microorganisms.

It is important to note that sterilization in the operating room is only one part of the infection control process in the hospital environment. Strict hygiene measures, such as hand washing, use of sterile gowns and gloves, and proper cleaning and disinfection of the operating room and equipment, must also be followed. This helps prevent the transmission of infections during surgical procedures.

What are sterilization pouches?

Elinic® sterilization pouches are medical devices designed to keep products free of viruses and bacteria by creating a protective barrier. They are made of medical grade paper and clear polymer specially designed for autoclaves, a sterilization tool that uses very high temperatures and high pressure to kill microorganisms.

These pouches are primarily used in healthcare environments, such as hospitals and clinics, and other environments where a high degree of sterilization is required to protect the health of patients and prevent the spread of infections, such as beauty salons.

Sterilization pouches are a safe and efficient option for protecting contamination-sensitive products, such as medical equipment and beauty utensils. There are also pouches made of high quality kraft paper for dry heat autoclave sterilization, which guarantee a sterile environment for the products inside.

It is important to note that the information provided is a general summary and it is recommended to consult additional sources for more specific information on the use and benefits of sterilization pouches.